Day two

From Maslab 2007

Revision as of 06:46, 4 January 2007; Valmo (Talk | contribs)
(diff) ←Older revision | Current revision | Newer revision→ (diff)
Jump to: navigation, search
  1. If you didn't finish yesterday's activities, do that first.
  2. Sensor characterization: PICK ONE of the following two assignments to have checked off by a staff member: YOU ONLY HAVE TO DO ONE
    • Calibrate an IR sensor to have your pegbot stop 6 inches from an obstacle. The robot should either stop until the obstacle is removed, or back up and turn away from the obstacle. When stopped, the robot should indicate it is in front of an obstacle on the BotClient.
    • Calibrate an IR sensor to find corners/gaps in a wall (such as mousehole or entrance into another part of the playing field). When it finds a corner/gap, the robot should pause and indicate this information on the BotClient.
  3. Experiment with other data inputs (sonar, gyro, camera, encoders).
  4. Work on your robot.
Retrieved from "http://maslab.mit.edu/2007/wiki/Day_two"