Gyroscope
From Maslab 2007
Revision as of 00:25, 10 January 2007; Danyq (Talk | contribs)
(diff) ←Older revision | Current revision | Newer revision→ (diff)
(diff) ←Older revision | Current revision | Newer revision→ (diff)
See the Orc Manual, section 4.3. You can either make a cable as shown there, or (carefully!) solder one piece of female header to a position in the fourth row of the I/O pins on the orcboard, so that you can plug it in directly. The fourth row is also signal, and is connected directly to the third row.
