Gyroscope

From Maslab 2011

Revision as of 22:05, 24 December 2010 by Yichen (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

See the Orc Manual, section 4.3. You can either make a cable as shown there, or (carefully!) solder one piece of female header to a position in the fourth row of the I/O pins on the orcboard, so that you can plug it in directly. The fourth row is also signal, and is connected directly to the third row.

Retrieved from "https://maslab.mit.edu/2011/wiki/Gyroscope"
Personal tools